Products
Home > Products > Switchgear & Transformer
GCK series Low Voltage Switchgear
Standard Specification

++++General£º
     GCK series Low voltage switchgear(hereinafter short as switchgear)is a complete power distribution device for 3.6~24kV,3-phase AC 50Hz,single-bus and single-bus sectionalized system. It is mainly used for power transmission of middle/small generators in power plants; power receiving, transmission for substations in power distribution and power system of factories, mines and enterprises, and starting of large high-voltage motor, etc.,so as to control, protect and monitor the system. The switchgear meets IEC298,GB3906-91.In addition to be used with domestic VS1 vacuum circuit breaker, it can also be used with VD4 from ABB,3AH5 from Siemens

domestic ZN65A,and VB2 from GE, etc.,it is truly a power distribution device with good performance. In order to meet the requirement for wall mounting and front-end maintenance, the switchgear is equipped with a special current transformer, so that the operator can maintain and inspect it in front of the cubicle.

++++Service environment:
     a) Air temperature: Maximum temperature: +40¡ãC; Minimum temperature:-15¡ãC

     b) Humidity: Monthly average humidity 95%; Daily average humidity 90% .

     c) Altitude above sea level: Maximum installation altitude: 1000M.

     d) Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.

     e) No frequent violent shake

++++Main technical parameters:


 Protection grade

 1P40

 Rated working voltage

 AC, 380(V)

 Frequency

 50Hz

 Rated insulation voltage

 660V

 Working conditions

 

 Environment

 Indoors

 Altitude

 ¡Ü2000m

 Ambient temperature

 -5¡æ~+ 40¡æ

The min temperature under store and transportation

-30¡æ

Relative hunidity

¡Ü90%

Capacity of control motor(kW)

0.4~155


top
Product Catalog
Products